On Friday 03 October 2008 15:24:46 you wrote:
> Hi Bogdan,
>
> I have tried that one too
>
> svn co --username marky --password anto
> svn://192.168.1.250/ble//home/developer/svntest/
>
> this gives an error like this
>
> svn: URL 'svn://192.168.1.250/ble' doesn't exist
>
> Thanks for your replies
>
>
> Marky
It is difficult to say what went wrong. The best approach would be to read
carefully the subversion book.
Other solution: use first anonymous access, verify that you can make a ci/co,
then use the password file and then the autz file to localize the problem.
>
> On Fri, Oct 3, 2008 at 5:48 PM, Bogdan Cristea <cristeab_at_gmail.com> wrote:
> > On Friday 03 October 2008 15:11:50 you wrote:
> > > Hi Bogdan,
> > >
> > > This is my svnserve.conf
> > >
> > > [general]
> > > ### These options control access to the repository for unauthenticated
> > > ### and authenticated users. Valid values are "write", "read",
> > > ### and "none". The sample settings below are the defaults.
> > > anon-access = none
> > > auth-access = write
> > > ### The password-db option controls the location of the password
> > > ### database file. Unless you specify a path starting with a /,
> > > ### the file's location is relative to the conf directory.
> > > ### Uncomment the line below to use the default password file.
> > > password-db = /home/svn/blenglishcafe/conf/passwd
> > > ### The authz-db option controls the location of the authorization
> > > ### rules for path-based access control. Unless you specify a path
> > > ### starting with a /, the file's location is relative to the conf
> > > ### directory. If you don't specify an authz-db, no path-based access
> > > ### control is done.
> > > ### Uncomment the line below to use the default authorization file.
> > > authz-db = /home/svn/blenglishcafe/conf/authz
> > > ### This option specifies the authentication realm of the repository.
> > > ### If two repositories have the same authentication realm, they should
> > > ### have the same password database, and vice versa. The default realm
> > > ### is repository's uuid.
> > > realm = My First Repository
> > >
> > >
> > > this my authz
> > >
> > > [groups]
> > > #marky_and_anto = marky,anto
> > > [/]
> > > # harry = rw
> > > marky = rw
> > > anto = rw
> > > * =
> > > [repository:/home/svn/blenglishcafe/]
> > > # @harry_and_sally = rw
> > > marky = rw
> > > anto = rw
> > > "authz" 23L, 730C
> > >
> > > and this is my passwd file
> > >
> > > [users]
> > > # harry = harryssecret
> > > # sally = sallyssecret
> > > marky = anto
> > > anto = marky
> > >
> > > Have I comitted any mistake in this, Kindly suggest .
> >
> > It seems ok for me, be sure that both files, authz and passwd are in the
> > folder given in svnserve.conf.
> >
> > When you do a checkout, specify an username, otherwise the current user
> > will
> > be used:
> > svn co svn://192.168.1.250/ble /home/developer/svntest/ --username marky
> >
> > > Thanks and Regards
> > >
> > > Marky
> > >
> > > On Fri, Oct 3, 2008 at 5:34 PM, Bogdan Cristea <cristeab_at_gmail.com>
> >
> > wrote:
> > > > On Friday 03 October 2008 14:59:41 you wrote:
> > > > > Dear Bogdan,
> > > > >
> > > > > now when I try
> > > > > [root_at_staging ~]# svn co
> > > > > svn://192.168.1.250/ble/home/developer/svntest/ Authentication
> >
> > realm:
> > > > > <svn://192.168.1.250:3690> My First Repository Password for 'root':
> > > > >
> > > > > What is the password it is asking for?
> > > > >
> > > > > Thanks and Regards
> > > > >
> > > > > marky
> > > >
> > > > Hi Marky
> > > > Your repository is not yet configured. Go to /home/svn/ble and you
> > > > should see a folder conf which contains svnserve.conf file. Modify
> > > > this file to suit
> > > > your needs. I don't use this option, but it should be enough to
> > > > enable anonymous access for this repository:
> > > > anon-access = write
> > > >
> > > > As someone else suggested, use subversion help to learn how to
> >
> > configure
> >
> > > > svnserve.
> > > >
> > > > regards
> > > > Bogdan
> > > >
> > > > > On Fri, Oct 3, 2008 at 5:13 PM, Bogdan Cristea <cristeab_at_gmail.com>
> > > >
> > > > wrote:
> > > > > > On Friday 03 October 2008 14:36:27 you wrote:
> > > > > > > Hi Bogdan,
> > > > > > >
> > > > > > > I use a single repository without the native svn format
> > > > > > > trunk-branches,
> > > > > >
> > > > > > I
> > > > > >
> > > > > > > have created repository in /home/svn/ble and imported my files
> >
> > into
> >
> > > > the
> > > >
> > > > > > > repository.
> > > > > > >
> > > > > > > I invoke svn using svnserver -d –r /home/svn/ble.
> > > > > >
> > > > > > This could be a mistake if ble is a repository. You should give
> > > > > > to svnserve the path to the folder hosting your repositories:
> > > > > > svnserver -d –r /home/svn
> > > > > >
> > > > > > > Then I svn co
> > > > > > > svn://192.168.1.250/home/svn/ble/home/developer/svntest/….Pleas
> > > > > > >e correct me if I am wrong.
> > > > > >
> > > > > > If ble is your repository, then:
> > > > > > svn co svn://192.168.1.250/ble /home/developer/svntest/
> > > > > >
> > > > > > The path from ble above in the folders tree is already given as
> > > >
> > > > argument
> > > >
> > > > > > to svnserve.
> > > > > >
> > > > > > > Hi Marc,
> > > > > > >
> > > > > > > I was doing a blunder mistake, I was trying the "svn status" in
> >
> > the
> >
> > > > > > > repository. I know I should read the book before I start doing
> >
> > this
> >
> > > > but
> > > >
> > > > > > my
> > > > > >
> > > > > > > superiors have assigned a task for me to create a production
> > > >
> > > > repository
> > > >
> > > > > > > before this weekend.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Hi Rayan,
> > > > > > >
> > > > > > > It was a typo mistake, copied the error from the wrong machine,
> >
> > my
> >
> > > > > > > actual repository is in /home/svn/ble
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > My Current Scenario is as follows,
> > > > > > >
> > > > > > > I have to set up a svn repository in my local linux box where
> > > > > > > my
> > > > > >
> > > > > > developers
> > > > > >
> > > > > > > would get their working copy from.
> > > > > > >
> > > > > > > I have remote web server which would also take the latest
> > > > > > > update from the repository(This will be done manually).This web
> > > > > > > server would be running
> > > > > >
> > > > > > on
> > > > > >
> > > > > > > linux and my developers would be using windows .
> > > > > > >
> > > > > > > This is what I am trying to do, Now my developers are able to
> > > > > > > get
> > > >
> > > > their
> > > >
> > > > > > > working copy and are able to commit. My problem is, I am not
> > > > > > > able to
> > > > > >
> > > > > > check
> > > > > >
> > > > > > > out from my remote web server.
> > > > > > >
> > > > > > > Am I going on the right path? Please suggest.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Thanks and regards
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > Marky
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On Fri, Oct 3, 2008 at 4:04 PM, Ryan Schmidt <
> > > > > > >
> > > > > > > subversion-2008c_at_ryandesign.com> wrote:
> > > > > > > > On Oct 3, 2008, at 4:57 AM, Anto Marky wrote:
> > > > > > > >
> > > > > > > > I posted the below error earlier still hanging on with it,
> > > > > > > > When
> >
> > I
> >
> > > > > > > > tried svn
> > > > > > > >
> > > > > > > >> status from my repository directory it gives an error like
> >
> > this
> >
> > > > > > > >> -svn: warning: '.' is not a working copy.
> > > > > > > >
> > > > > > > > That warning is of course completely correct. Your repository
> > > > > > > > directory is not a working copy, nor should it be; running
> > > > > > > > "svn status" in your repository directory is not useful.
> > > > > > > >
> > > > > > > > Does anybody know what is happening? Could anybody please
> > > > > > > > help
> >
> > me
> >
> > > > > > resolve
> > > > > >
> > > > > > > >> this issue?
> > > > > > > >>
> > > > > > > >> On Oct 3, 2008, at 2:30 AM, Bogdan Cristea wrote:
> > > > > > > >>
> > > > > > > >> On Friday 03 October 2008 10:13:03 Anto Marky wrote:
> > > > > > > >>> > I created a repository under my /home/svn/ directory, I
> >
> > have
> >
> > > > > > > >>> > edited my svnserver.conf and changed the auth-access to
> >
> > reade
> >
> > > > > > > >>> > write, and passwd
> > > > > > > >>>
> > > > > > > >>> file
> > > > > > > >>>
> > > > > > > >>> > to passwd and have added users to my passwd file.I am
> > > > > > > >>> > able
> >
> > to
> >
> > > > > > > >>> > checkout
> > > > > > > >>>
> > > > > > > >>> and
> > > > > > > >>>
> > > > > > > >>> > commit from my windows machines.But when I try svn co
> > > > > > > >>> > with the command
> > > > > > > >>>
> > > > > > > >>> ,
> > > > > > > >>>
> > > > > > > >>> > svn co
> > > > > > > >>> > svn://192.168.1.250/home/svn/ble/home/developer/svntest/,
> > > > > >
> > > > > > I
> > > > > >
> > > > > > > >>> get the
> > > > > > > >>>
> > > > > > > >>> That command is wrong:
> > > > > > > >>> after the IP address you should use your repository name,
> >
> > then
> >
> > > > the
> > > >
> > > > > > path
> > > > > >
> > > > > > > >>> in
> > > > > > > >>> your repo, something like:
> > > > > > > >>> svn://192.168.1.250/repo_name/trunk .
> > > > > > > >>>
> > > > > > > >>> > error svn: No repository found in 'svn://
> > > > > > > >>> > 192.168.1.250/home/svn/blenglishcafe'.
> > > > > > > >
> > > > > > > > I don't understand why if your checkout command referenced
> >
> > "ble"
> >
> > > > the
> > > >
> > > > > > > > error message references "blenglishcafe".
> > > > > > > >
> > > > > > > > > I even tried svn co --username {user} --password {password}
> > > >
> > > > svn://
> > > >
> > > > > > > >> > 192.168.1.250/englishcafe/ /home/developer/svntest/ that
> >
> > one
> >
> > > > too
> > > >
> > > > > > gives
> > > > > >
> > > > > > > >> the
> > > > > > > >>
> > > > > > > >> > same error. When I try svnlook tree svn://
> > > > > >
> > > > > > 192.168.1.250/home/svn/ble I
> > > > > >
> > > > > > > >> can
> > > > > > > >>
> > > > > > > >> > see all the files and directories, When I try svn ls
> > > > > > > >> > svn:// 192.168.1.250/home/svn/ble I am able to see the
> >
> > repositories.I
> >
> > > > > > started
> > > > > >
> > > > > > > >> the
> > > > > > > >>
> > > > > > > >> > dameon a svnserve -d -r /home/svn/ (I have one more
> >
> > repository
> >
> > > > > > inside
> > > > > >
> > > > > > > >> > /home/svn which bld).
> > > > > > > >
> > > > > > > > Bogdan is right: the URL you're trying to check out from and
> >
> > the
> >
> > > > path
> > > >
> > > > > > you
> > > > > >
> > > > > > > > passed to "svnserve -d" are not compatible. You told svnserve
> > > > > > > > your repositories are located in /home/svn, therefore you
> >
> > cannot
> >
> > > > > > > > include "/home/svn" in the URL you're checking out.
> > > > > > > >
> > > > > > > > "svnlook tree svn://192.168.1.250/home/svn/ble" can't have
> > > > > > > > worked;
> > > > > >
> > > > > > when I
> > > > > >
> > > > > > > > run that, it says "'svn://192.168.1.250/home/svn/ble' is a
> > > > > > > > URL
> > > >
> > > > when
> > > >
> > > > > > > > it should be a path"
> > > > > >
> > > > > > --
> > > > > > Bogdan Cristea
> > > > > > software engineer
> > > > > > Sytron Technologies Overseas
> > > > > > www.sytron.ro
> > > >
> > > > --
> > > > Bogdan Cristea
> > > > software engineer
> > > > Sytron Technologies Overseas
> > > > www.sytron.ro
> >
> > --
> > Bogdan Cristea
> > software engineer
> > Sytron Technologies Overseas
> > www.sytron.ro
--
Bogdan Cristea
software engineer
Sytron Technologies Overseas
www.sytron.ro
---------------------------------------------------------------------
To unsubscribe, e-mail: users-unsubscribe_at_subversion.tigris.org
For additional commands, e-mail: users-help_at_subversion.tigris.org
Received on 2008-10-03 14:30:09 CEST